How do I remove the chain from a cordless handheld chainsaw?

Jan 21, 2026

Leave a message

Hey there! As a supplier of Cordless Handheld Chainsaws, I often get asked about how to remove the chain from these nifty tools. It's a crucial skill to have, whether you're looking to replace a worn - out chain, sharpen it, or just do some general maintenance. So, let's dive right in and learn how to get that chain off your cordless handheld chainsaw.

Why Remove the Chain?

Before we jump into the process, you might be wondering why you'd even want to remove the chain. Well, there are a few good reasons. Over time, the chain on your chainsaw can get dull. A dull chain not only makes your cutting jobs harder but can also be dangerous. By removing the chain, you can sharpen it properly or replace it with a new one. Also, if there's any debris or dirt stuck in the chain, removing it allows you to clean it thoroughly.

Tools You'll Need

First things first, gather the necessary tools. You won't need a whole bunch of fancy stuff. Usually, you'll just need a flat - head screwdriver and a pair of pliers. Some chainsaws come with a special tool for removing the chain, so check your toolbox that came with the saw. If you're using our Brushless Electric Chainsaw, it might have a unique setup, but the basic principle remains the same.

Safety First

Safety is super important when working with any power tool, and a chainsaw is no exception. Before you start removing the chain, make sure the chainsaw is turned off and the battery is removed. This will prevent any accidental starts that could lead to serious injury. Also, wear some protective gloves to keep your hands safe from the sharp chain and any other rough edges on the saw.

Step - by - Step Guide

Step 1: Locate the Chain Tensioning Mechanism

Most cordless handheld chainsaws have a chain tensioning mechanism. This is usually a screw or a knob that you can turn to adjust the tightness of the chain. On some models, it might be located on the side of the saw near the bar. Find this mechanism and use your flat - head screwdriver or the special tool (if you have one) to loosen it. Loosening the tension will make it easier to remove the chain.

32

Step 2: Remove the Side Cover

Once the chain is loose, you'll need to remove the side cover of the chainsaw. This cover protects the chain and the bar. Look for the screws holding the cover in place. Use your screwdriver to remove these screws and set them aside in a safe place so you don't lose them. After removing the screws, gently lift off the side cover. You should now have a clear view of the chain and the bar.

Step 3: Slide the Chain off the Bar

With the side cover removed, you can now start removing the chain. Take your pliers and gently grasp the chain. Start by pulling it away from the bar. You might need to wiggle it a bit to get it loose. Be careful not to cut yourself on the sharp teeth of the chain. Slowly work your way around the bar, sliding the chain off until it's completely free.

Step 4: Inspect the Chain and Bar

Now that the chain is off, take a good look at it and the bar. Check the chain for any signs of wear, like dull teeth or broken links. If the chain looks too worn, it's probably time to replace it. You can check out our Cordless Brushless Chainsaw for replacement chains that are compatible with your saw. Also, inspect the bar for any damage or debris. Clean the bar if necessary to ensure smooth operation when you put the new or sharpened chain back on.

Putting the Chain Back On

Once you've sharpened or replaced the chain, it's time to put it back on. The process is pretty much the reverse of removing it. First, place the chain back on the bar, making sure the teeth are facing the right direction. You can refer to the markings on the bar or the user manual to get this right. Then, put the side cover back on and tighten the screws. Finally, use the chain tensioning mechanism to adjust the tightness of the chain. You want the chain to be snug but still able to move freely around the bar.

Tips and Tricks

  • If the chain is really stuck, you can try spraying a little bit of lubricant around the bar and the chain. This can help loosen it up.
  • When adjusting the chain tension, make sure it's not too tight or too loose. A chain that's too tight can put extra stress on the saw's motor, while a chain that's too loose can come off during operation.
  • If you're having trouble getting the chain back on, it can be helpful to have someone else hold the saw steady while you work.

Our Chainsaw Range

As a supplier, we offer a wide range of cordless handheld chainsaws to suit different needs. Our 6 Inch Cordless Mini Chainsaw is perfect for small jobs around the yard, like pruning branches. The larger models are great for more heavy - duty tasks. All our chainsaws are designed with user - friendly features and are built to last.

Contact Us for Purchases

If you're in the market for a new cordless handheld chainsaw or need replacement parts, we'd love to hear from you. Whether you're a homeowner looking for a reliable tool for your garden or a professional in the forestry business, we have the right chainsaw for you. Just reach out to us, and we can discuss your requirements and get you the best deal.

References

  • Chainsaw User Manuals
  • Chainsaw Maintenance Guides
Michael Chen
Michael Chen
With over 10 years of experience in landscape design, I'm dedicated to helping you achieve your gardening goals. My passion lies in combining creativity with sustainable practices using Homelux's innovative cordless tools.
Send Inquiry